Engineered waterproofing systems for every part of your building
Cool-roof refurbishment without tear-off
A high-solids, liquid-applied silicone coating that cures into a seamless, elastic and highly reflective membrane. It bonds directly to concrete and metal without a primer, and can also be applied over sound existing roofs, avoiding the cost and disruption of removal.
Insulation and waterproofing in one system
The combo roof combines spray-applied polyurethane foam insulation with a rubberised bitumen waterproofing layer, a geotextile, a screed laid to slope and a final top coat, with sealed joints. It delivers waterproofing and thermal insulation in one system, widely specified across the UAE.
SBS / APP membranes in an inverted roof
Reinforced modified-bitumen membranes are torch-bonded to a primed substrate in one or two layers. In an inverted roof, the insulation sits above the membrane, protecting it from heat, UV and mechanical damage and greatly extending its service life.
Seamless, elastic and cold-applied
A polyurethane membrane applied by roller or spray that forms an elastic, seamless film. It bridges cracks, wraps around drains and penetrations, and can be tiled over or finished with a UV-resistant top coat.
Tough waterproofing that takes traffic
A fast-curing, spray-applied elastomer that forms a tough, seamless membrane within seconds. Its exceptional abrasion, chemical and impact resistance makes it ideal wherever waterproofing must also carry traffic or contain water.
Stopping active leaks from the inside
Active leaks through cracks, joints and honeycombing are sealed by injecting polyurethane or acrylic resin under pressure through packers. The resin reacts with water and expands to seal the leak path from within the structure, with no excavation needed.